Case Studies

This job is scanning a 50 m long capping beam on a civil job at Pomona. The land had slipped with all the wet weather last summer and the hill needed stabilising.

A residential driveway removal in pelican waters using the road saw. The driveway was chopped up into 1 metre squares to be loaded into the tipper for removal.

A residential driveway concrete sawing project for removal in Buderim on the Sunshine Coast. The concrete was sliced up into 1 metre squares for a machine to pick up and put into a tipper truck.

The client has since laid a new driveway.

Concrete cutting for a lift installation during a renovation of a 2 level penthouse in Cotton Tree. Using 3 phase electric saws and a generator.

We cored each corner to prevent any over cutting

Our client at Pelican Waters wanted to complement their new house build with a wall that would not only serve as a boundary but also enhance the aesthetic appeal of their property.

Our team expertly cut and sawed through the concrete walls, ensuring precise craftsmanship and attention to detail. The result was a beautiful, functional fence that seamlessly matched the client’s home’s modern design, adding value and visual interest to the property.

Large rectangular penetration cut into block walls for air conditioning ducting and cutting the wall for a new window

New school building at Coolum Christian College.

Cut block wall on an angle. There will be an access ramp built over the top of the wall eventually.

Small job using the roadsaw. Cutting around some broken concrete that is to be pulled out and replaced at a scrap metal yard.

Concrete was 300 mm thick.

Poker machine room renovation.

Core holes x20 in the slab under each poker machine to get power to them.

Concrete cutting to install the plumbing system at the back of the property where a granny flat being built. Plumbing connection / seed pit is at the front.

Core drilling was completed to create holes for basement carpark ventilation ductwork. This allowed for efficient installation of the mechanical ventilation system while preserving structural integrity and ensuring proper airflow management.

Core holes were drilled in a unit block under construction in Maroochydore to enable the installation of fire protection piping. The work ensured accurate penetrations for fire safety compliance during early construction phases.

This Roadsaw job in Kawana involved cutting and removing a concrete carpark to prepare the site for future development. The team used specialised equipment to complete the job efficiently and safely.

This project at Pacific Lutheran College in Meridan Plains involved ringsaw cutting to support the construction of a new sports centre building. The team delivered clean and precise cuts in tight areas, ensuring accuracy without compromising structural integrity.

This refurb job at Kawana Secondary School involved internal wall cutting using an electric saw. The team performed precise cuts with minimal disruption, ideal for the school’s indoor environment.

This kerb cutting project in Maroochydore was carried out for a new duplex build. The team delivered clean, compliant cuts to allow for new driveway access, ensuring precision and smooth integration with existing infrastructure.

Concrete scanning was carried out in the basement of a Birtinya property to locate services before cutting. The work was necessary to access and repair leaking underground water tanks safely.

A precision wall cut was completed in a Buderim property to allow for new service installation. The work was carried out with minimal disruption and ensured clean access through reinforced concrete.

Concrete scanning was performed at Kings Beach Pool to identify embedded services and structural elements before cutting. This ensured safe and accurate modifications without damaging underlying infrastructure.

Electric wall cutting was carried out as part of a home renovation in Doonan. The method allowed for clean, low-dust cuts through masonry, making it ideal for internal modifications.

Core drilling was completed in Buderim to create precise holes for installing glass panel pool fence spigots. The work ensured accurate alignment and a clean finish for the poolside safety barrier.

Core drilling was carried out in Gympie to install netball goal posts at a newly built sports complex. The work ensured secure, level placement for long-term durability and performance.

Soff cuts were made in a freshly poured concrete slab at Coolum Christian College for new sports courts. These early-entry cuts help control cracking and ensure long-term durability of the surface.

This project at Waves Bowling Club in Caloundra involved precision core drilling to support facility upgrades. The team achieved clean, accurate holes while maintaining safety and minimizing disruption to the venue.

This driveway removal project in Little Mountain involved precise concrete sawing to break down and remove existing slabs efficiently. The team ensured clean cuts and safe site preparation for the upcoming works.

This project at the Currimundi Sports and Recreation Facility involved concrete scanning to locate safe drilling points for electrical services through the slab. The scanning ensured precision and safety as part of the facility’s ongoing expansion.

This project involved cutting a new doorway into an internal wall to allow lift access to an additional roof-level stop. Electric cutting equipment was used to complete the work safely and efficiently with minimal disruption.